Acquiring a development site without completing thorough due diligence is one of the most costly mistakes a property developer can make in Australia. Unlike purchasing an established home where the product is visible and inspectable, a development site is acquired for its potential - and that potential is only realised if the planning framework, physical conditions, services infrastructure and financial feasibility of the site all align to support the intended development.
Due diligence on a development site is the process of systematically investigating and verifying every material factor that affects the viability of the proposed development before committing to purchase. It is not a bureaucratic formality - it is the analytical process that separates experienced developers who make informed decisions from those who discover costly problems after the contracts are exchanged.
This guide provides a comprehensive due diligence framework for property development sites in Australia - covering planning assessment, physical site investigation, title and legal review, services confirmation, environmental assessment, financial analysis and the questions every developer should answer before exchanging contracts.
Why development site due diligence matters
The consequences of inadequate due diligence on a development site are severe and frequently irreversible. Common outcomes of insufficient due diligence include:
- Acquiring a site that cannot achieve the intended development yield due to planning constraints not identified before purchase
- Discovering rock, contamination or poor soil conditions that make construction significantly more expensive than budgeted
- Finding that services - sewer, water, electricity - are not available at the site boundary and require expensive extensions
- Uncovering title encumbrances - easements, covenants or caveats - that restrict development potential
- Paying above the residual land value because the feasibility was based on incorrect assumptions about costs or yield
Each of these outcomes can eliminate project viability entirely. A thorough due diligence process identifies these issues before purchase - when the cost of walking away from a deal is the loss of due diligence costs rather than the loss of the entire investment.
For more detail on the financial analysis component of site assessment, refer to the BUILTLY guide on Feasibility Study for Residential Development in Australia.
Before you start: define your development parameters
Effective due diligence begins with a clear understanding of what you are trying to develop. Before assessing any specific site, confirm:
- The intended development type - detached dwellings, duplex, townhouses, apartments
- The target yield - number of dwellings required to achieve the project feasibility
- The minimum site area and dimensions required for the intended yield
- The planning zone and development controls required to support the intended development
- The maximum land price that allows the project to achieve the target return - based on residual land value analysis
Without these parameters defined, due diligence becomes an unfocused exercise. With them, each due diligence investigation has a clear purpose - confirming whether the site can support the intended development at the required return.
Planning due diligence
Planning due diligence is the most critical component of development site assessment. The planning framework determines what can be built on the site - and no amount of good design, construction efficiency or marketing can overcome a planning constraint that prevents the intended development from proceeding.
Zoning confirmation
Confirm the current zone of the site under the relevant state planning framework and local planning scheme. Key questions to answer:
- Is the intended development type permitted in this zone?
- What is the minimum lot size per dwelling permitted in this zone?
- What maximum height applies?
- What minimum setbacks apply from boundaries, roads and neighbouring dwellings?
- What maximum site coverage and floor area ratio apply?
- What minimum landscaping and open space requirements apply?
- What car parking requirements apply?
Do not rely solely on online planning portals for zoning information - planning schemes are amended regularly and online tools are not always current. Confirm zoning with the relevant planning authority directly.
Overlay controls
Identify all overlay controls affecting the site. Overlays can significantly affect development potential and construction cost - and are not always visible in basic zoning searches. Key overlays to check include:
- Heritage overlays - restrict demolition and require design response to heritage context
- Flood overlays - may restrict development in high risk areas or require elevated floor levels
- Bushfire attack level - imposes construction standards in bushfire prone areas
- Vegetation overlays - restrict clearing of significant trees or vegetation
- Slope and erosion overlays - impose additional requirements on steep or unstable land
- Infrastructure overlays - identify land required for future roads or public open space that may affect the developable area of the site
Pre-lodgement meeting with council
For any site where planning risk is a consideration, a pre-lodgement meeting with the relevant council planning department is strongly recommended before purchase. A pre-lodgement meeting allows the developer to test the development concept informally with council planners - getting an indication of whether the proposed development is likely to be supported before committing to the land purchase.
Pre-lodgement meetings are typically free or low cost and can be arranged directly with the council planning department. The information obtained is invaluable - it is not unusual for a pre-lodgement meeting to identify a planning issue that fundamentally affects the development concept before purchase.
Infrastructure charges
Confirm the infrastructure charges and developer contributions applicable to the intended development with the relevant council. Infrastructure charges can be substantial - particularly in Queensland where charges per dwelling can range from $20,000 to $50,000 or more. Further information is available at qld.gov.au. Charges that are not identified before purchase cannot be included in the feasibility - creating a cost blowout that may eliminate project viability.
For more detail on the planning framework across different Australian states and territories, refer to the BUILTLY guides on How to Choose a Site for Residential Development in Australia, The Residential Property Development Process in Australia and How to Read a Development Approval in Australia. Further information on NSW planning is available at planning.nsw.gov.au and Victorian planning at planning.vic.gov.au.
Title and legal due diligence
Title and legal due diligence confirms that the developer will receive clear, unencumbered title to the land at settlement and that there are no legal issues that affect development potential.
Title search
A full title search - obtained from the relevant state land titles office - confirms:
- The legal description of the land and its boundaries
- The registered owner and any co-owners
- Whether the title is freehold, leasehold or Crown land
- All registered encumbrances - easements, covenants, caveats and mortgages
- Whether the land is affected by any statutory charges or government interests
A title search should be obtained before any offer is made on a development site - not after contracts are exchanged.
Easements
Easements - rights held by third parties to use part of the land for a defined purpose - can significantly affect development potential by restricting building over the easement area. Common easements on development sites include:
- Drainage easements - preventing building over stormwater drainage infrastructure
- Services easements - protecting water, sewer, gas or electrical services running through the site
- Access easements - providing right of access to neighbouring properties
- Transmission line easements - restricting development under or near high voltage infrastructure
Identify the location and extent of all easements on the site and overlay them on the proposed development footprint to confirm whether they affect the achievable yield or building position.
Restrictive covenants
Restrictive covenants - obligations registered on title that restrict how the land can be used or developed - are common on land in established subdivisions. Covenants may restrict the number of dwellings on the site, prohibit certain building materials or require minimum building setbacks in excess of council requirements. Confirm whether any restrictive covenants apply to the site and whether they affect the intended development.
Caveats
A caveat on title - lodged by a third party claiming an interest in the land - must be resolved before title can be transferred. Confirm whether any caveats are registered on the title and obtain legal advice on their implications before proceeding.
Survey
For sites where boundary locations are uncertain or where the site dimensions are critical to the development yield, commission a registered surveyor to carry out a boundary survey before purchase. Survey costs are modest relative to the risk of discovering that the site is smaller or shaped differently than assumed.
Physical site investigation
Physical site investigation confirms that the land can support the intended development without incurring unforeseen construction costs.
Geotechnical investigation
A geotechnical investigation - involving on-site soil testing through bore holes, test pits or dynamic cone penetrometer tests - assesses the bearing capacity of the soil, identifies the depth and character of underlying material and determines the appropriate foundation system for the intended development.
For sites where slope, fill, unusual soil conditions or rock presence are possible, a geotechnical investigation before purchase is strongly recommended. The cost of a geotechnical investigation - typically $1,500 to $5,000 depending on the scope - is modest relative to the potential cost of discovering poor soil conditions after purchase.
Key geotechnical risks to assess
- Low bearing capacity - requiring more expensive foundation systems
- Expansive clay soils - requiring engineered slab systems and reactive soil management
- Fill material - requiring compaction verification or removal and replacement
- Rock close to surface - requiring rock breaking or blasting during excavation
- High water table - affecting foundation design and basement viability
- Slope instability - requiring geotechnical engineering for retaining and stability
Site survey and topography
Confirm the site dimensions, area, levels and topography through a registered survey. For sloped sites, a detailed topographic survey is essential for understanding earthworks volumes, retaining requirements and drainage design.
Existing structures
If the site contains existing structures that will be demolished, assess:
- The construction type and approximate age of existing buildings
- The likely presence of asbestos - common in buildings constructed before 1990
- The estimated demolition cost - including asbestos removal and waste disposal
- The condition of any structures that may be retained or adapted
Site access
Confirm that the site has legal road access - either direct frontage to a public road or a registered right of access. Sites without legal road access cannot be developed without resolving the access issue, which may require acquiring an easement from neighbouring landowners.
Services and infrastructure due diligence
Confirming the availability and capacity of reticulated services before purchase prevents costly surprises during the development process.
Sewer
Confirm the location, depth and capacity of the nearest sewer main and the connection requirements for the proposed development. Sites that require significant sewer extension - particularly where the nearest sewer main is distant or at insufficient depth - carry additional infrastructure costs that must be included in the feasibility.
Water supply
Confirm that reticulated water supply is available at the site boundary in sufficient capacity for the proposed development. For larger developments, a water supply capacity assessment from the water authority may be required.
Stormwater drainage
Confirm the stormwater drainage requirements for the site - including where stormwater is to be discharged and whether a detention system is required. Some councils impose significant stormwater detention requirements that affect site design and add construction cost.
Electricity
Confirm the location of the nearest electrical connection point and the capacity available for the proposed development. For developments requiring three-phase power or significant electrical infrastructure, obtain a connection enquiry from the relevant network operator before purchase.
Gas and telecommunications
Confirm the availability of gas and telecommunications services where relevant to the intended development and product specification.
Environmental due diligence
Environmental due diligence identifies contamination, heritage and ecological issues that could affect development viability.
Contamination assessment
A Phase 1 Environmental Site Assessment - a desktop review of the site's historical land use - should be completed for any site with a history of industrial, commercial or agricultural use. Phase 1 assessment identifies potential contamination risks that may require further investigation through a Phase 2 assessment involving on-site soil and groundwater testing.
Contaminated sites can involve substantial remediation costs and in some cases may be undevelopable without significant environmental works. Identifying contamination risk before purchase is essential.
Heritage assessment
Confirm whether the site or any structures on it are listed on the state or local heritage register. Heritage listing can significantly restrict demolition, alteration and new construction and may require specialist heritage impact assessments as part of the development application.
Ecological assessment
For sites in areas with potential ecological significance - bush remnants, riparian corridors, habitat for threatened species - a preliminary ecological assessment may be required before purchase to confirm that the intended development can proceed without unacceptable ecological impact.
Financial due diligence
Residual land value analysis
A residual land value analysis - working backwards from the target development return to calculate the maximum land price - should be completed before making any offer on a development site. The residual land value establishes the ceiling for land acquisition negotiation.
Updated feasibility study
Once the physical, planning and services due diligence is substantially complete, update the development feasibility study with the confirmed inputs - actual yield, confirmed infrastructure charges, geotechnical-informed construction cost estimates and current comparable sales data for revenue projections.
The feasibility at this stage should be significantly more accurate than the preliminary assessment completed before due diligence - and may reveal cost factors not visible in the initial assessment that affect the maximum viable land price.
Finance confirmation
Before exchanging contracts, obtain indicative finance terms from your development lender - confirming that the project is financeable at the proposed land price and development cost with acceptable loan terms. For more detail, refer to the BUILTLY guide on Property Development Finance in Australia: A Complete Guide.
Due diligence checklist
Use the following checklist before exchanging contracts on any development site:
Planning
Title and legal
Physical
Services
Environmental
Financial
Frequently asked questions
How long does development site due diligence take in Australia?
Thorough development site due diligence typically takes four to eight weeks depending on the complexity of the site and the time required to obtain information from planning authorities, service providers and specialist consultants. For sites with straightforward planning and physical conditions, due diligence can be completed in three to four weeks. For complex sites with planning risk, contamination or significant physical constraints, six to ten weeks or more may be required.
Should I complete due diligence before or after making an offer?
For highly competitive sites where speed is essential, a preliminary desktop assessment - planning review and residual land value analysis - can be completed before making an offer, with more detailed due diligence carried out during a due diligence condition period negotiated as part of the contract. The length of the due diligence period - typically 30 to 60 days - should be sufficient to complete the key investigations before the contract becomes unconditional.
What happens if due diligence reveals a problem after contracts are exchanged?
If the contract includes a due diligence condition - allowing the purchaser to terminate the contract if due diligence investigations reveal a material issue - the purchaser can typically withdraw from the contract and recover their deposit. Without a due diligence condition, the purchaser may have limited recourse if problems are discovered after exchange. Always ensure a due diligence condition is included in the contract for a development site purchase.
How much does development site due diligence cost?
The cost of due diligence varies considerably depending on the scope of investigations required. A basic due diligence program - title search, planning review and desktop geotechnical assessment - can be completed for $2,000 to $5,000. A more comprehensive program including geotechnical investigation, environmental assessment, survey and specialist planning advice can cost $10,000 to $30,000 or more for a complex site. These costs are modest relative to the risk of proceeding without thorough due diligence.
What is the most commonly overlooked due diligence item on development sites?
Infrastructure charges - particularly in Queensland - are frequently overlooked by developers who focus on planning and physical due diligence but do not confirm the charges applicable to their specific project with the relevant council. Infrastructure charges can add hundreds of thousands of dollars to the cost of a larger development project and can materially affect feasibility. Always confirm infrastructure charge rates before finalising the feasibility and the maximum land price.