Buying off-the-plan - committing to purchase a property before it is built, based on plans, renders and a developer's promises - is one of the highest-risk property transactions available to Australian buyers. The risks are real, varied and in some cases catastrophic - from developers who fail to complete projects and disappear with deposits, to completed buildings that bear little resemblance to the marketed specification, to valuations at settlement that fall significantly below the purchase price. None of this means off-the-plan purchases are always bad investments - in the right project, with the right developer and with the right contract protections, buying off-the-plan can be a sound decision. But it requires a level of due diligence that most buyers do not apply. This guide covers every significant risk, what causes it and how to protect yourself before you sign.
What does buying off-the-plan mean?
Buying off-the-plan means entering into a contract to purchase a property - typically an apartment, townhouse or house and land package - before construction is complete or in some cases before it has commenced. The buyer pays a deposit - typically 10 percent of the purchase price - at the time of signing and pays the balance at settlement, which occurs when the building is completed and the title is registered.
The fundamental risk of buying off-the-plan is time - the gap between when the contract is signed and when settlement occurs can be 12 months to four years or more. During that period the property market can move significantly in either direction, the developer's financial position can change, the building can be completed to a different specification than what was marketed and external factors - interest rate changes, lending policy changes, economic conditions - can affect the buyer's ability to complete the purchase. Understanding what happens at each stage of building a home helps contextualise the construction timeline between contract and settlement.
Understanding these risks before signing is not pessimism - it is basic due diligence for one of the largest financial commitments most Australians will make.
The key risks of buying off-the-plan
| Risk | What it means | Likelihood | Severity | How to mitigate |
|---|---|---|---|---|
| Developer insolvency | Developer runs out of money and cannot complete the project | Low to moderate depending on developer | Very high - deposit may be lost | Verify developer track record, confirm deposit holding, research company history |
| Valuation shortfall at settlement | Completed property valued below purchase price - bank will not lend the full amount | Moderate in falling markets | High - buyer must fund the gap or default | Buy in strong markets, research comparable sales, understand sunset clause rights |
| Specification substitution | Developer substitutes specified materials or finishes with inferior alternatives | Moderate | Moderate - property quality below expectation | Read contract specification carefully, confirm substitution clause limitations |
| Sunset clause exploitation | Developer deliberately delays completion to trigger the sunset clause and resell at higher prices | Low but has occurred | High - buyer loses property they purchased at a lower price | Confirm sunset clause protections in your state, seek legal advice |
| Settlement delay | Construction takes longer than planned - buyer's financial arrangements expire | Moderate - construction delays are common | Moderate - refinancing costs and programme disruption | Confirm sunset clause timing, maintain financial flexibility |
| Design and quality disappointment | Completed property does not match the marketing renders and display suite | High - renders always flatter the reality | Low to moderate - subjective but affects satisfaction | Visit comparable completed projects by the same developer |
| Strata levy surprises | Ongoing body corporate levies significantly higher than indicated at sale | Moderate | Moderate - affects ongoing affordability | Obtain independent strata levy estimate before signing |
| Body corporate disputes | Common property disputes in strata developments | Low initially - increases over time | Low to moderate | Review the proposed owners corporation rules before signing |
| Market decline | Property market falls significantly between contract and settlement | Variable | High in severe downturns | Assess market conditions, buy for long term, understand cooling off rights |
| Lending policy changes | Bank tightens lending criteria between contract and settlement - buyer no longer qualifies | Low to moderate | High - buyer may be unable to settle | Obtain pre-approval with sunset clause condition, maintain financial position |
Developer insolvency - the highest severity risk
Developer insolvency - where the developer runs out of money before the project is complete - is the highest severity risk in off-the-plan purchasing because it can result in total loss of the deposit and no completed property.
How it happens
Property development is a high-risk, capital-intensive activity. Developers borrow significant sums to fund construction and rely on presale deposits, construction finance drawdowns and eventual settlement proceeds to fund the project. If construction costs exceed projections, if presale volumes fall below the lender's threshold, if the construction lender calls in their loan or if the developer has insufficient equity reserves to absorb cost overruns, the project can stall or collapse.
What happens to deposits
In most Australian states, off-the-plan deposits must be held in a solicitor's trust account - not released to the developer until settlement. If the developer becomes insolvent before settlement, the deposit held in trust should be returned to the buyer. However if the developer has released deposits improperly - in breach of the trust account requirements - buyers may become unsecured creditors in the insolvency with limited prospect of recovery.
How to mitigate
Research the developer's company history through ASIC Connect at connectonline.asic.gov.au. Confirm the company is in good standing and that no directors have been involved in previous development companies that were wound up. Confirm deposit holding arrangements in the contract - deposits must be held in a solicitor's trust account, not released to the developer or held in a non-statutory account. See the companion guide Property Developers Australia: What They Do and How They Work for the complete developer evaluation framework. For a detailed assessment approach, see what to look for in a property developer's past projects.
Valuation shortfall - the most common financial risk
A valuation shortfall at settlement occurs when the completed property is valued by the buyer's bank at settlement at less than the purchase price. This is one of the most commonly experienced financial risks in off-the-plan purchasing.
How it happens
The purchase price was agreed - often in a rising market - months or years before settlement. If the property market has declined in the interim, or if the completed development does not achieve the price points the developer marketed, the bank's valuation at settlement may be significantly below the contract price.
The financial consequence
If the bank values the property at $850,000 and the purchase price is $950,000, the bank will lend against the valuation - not the purchase price. The buyer must fund the $100,000 difference from their own resources or default on the contract, potentially losing their deposit.
How to mitigate
Research comparable sales of completed properties in the same development and nearby comparable buildings before signing. Understand the property market conditions at the time of signing relative to the contracted settlement timing. Maintain financial reserves beyond the minimum deposit - the ability to fund a reasonable valuation shortfall protects against a forced default. Confirm with a mortgage broker whether your borrowing capacity at settlement - accounting for potential interest rate and lending policy changes - is sufficient to settle at the contract price.
Specification substitution - what the contract allows
Most off-the-plan contracts include a substitution clause - a provision allowing the developer to substitute specified materials, finishes or fittings with alternatives of equivalent quality if the specified items become unavailable or uneconomical.
How it is used
Substitution clauses are designed for genuine unavailability - a specified tile being discontinued, for example. In practice they are sometimes used by developers to reduce costs - substituting a premium specified benchtop with a cheaper alternative and invoking the substitution clause when buyers object.
What to look for in the contract
A well-drafted substitution clause should specify that any substitution must be of equivalent or better quality and value. A poorly drafted clause allows the developer broad discretion to substitute with any alternative. Review the substitution clause carefully with a property lawyer before signing - a clause that allows the developer unlimited substitution effectively means the specification in the contract is not binding.
How to mitigate
Have a property lawyer review the substitution clause before signing. Confirm that the building specification attached to the contract - not the marketing brochure - describes the actual materials and finishes with sufficient specificity to be enforceable. Generic descriptions such as quality appliances or premium finishes without brand, model or grade specifications are not enforceable substitution protections.
The sunset clause - protection and risk
The sunset clause is a provision in every off-the-plan contract that sets a date by which the building must be completed and the title registered - or either party can terminate the contract. It is both a buyer protection and a risk.
As a buyer protection
The sunset clause prevents the developer from delaying the project indefinitely. If the sunset date passes without completion, the buyer can terminate the contract and receive their deposit back. This protects buyers from being locked into a contract for a project that is perpetually delayed.
As a risk - sunset clause exploitation
In rising property markets, some developers have deliberately delayed construction to allow the sunset clause to expire - enabling them to terminate contracts and resell the same properties at higher prices. This practice - while ethically questionable - has occurred in Australian markets. Some states have introduced legislative protections in response.
State protections against sunset clause exploitation
New South Wales - developers must obtain court approval or buyer consent to rescind an off-the-plan contract after the sunset date in most circumstances under the Conveyancing Act.
Queensland - sunset clause protections exist under the Body Corporate and Community Management Act for community title schemes.
Victoria - the Sale of Land Act provides sunset clause protections for residential off-the-plan contracts.
Confirm the applicable protections in your state with a property lawyer before signing.
What to check in an off-the-plan contract
| Contract element | What to look for | Red flag |
|---|---|---|
| Building specification | Specific materials, brands, grades and dimensions for all finishes and fittings | Generic descriptions - quality or premium without specifics |
| Substitution clause | Substitution limited to equivalent or better quality and value - developer must notify buyer | Broad substitution clause - developer has unlimited discretion |
| Sunset clause | Reasonable sunset date - typically 18 to 36 months from contract for apartments | Unusually long sunset date - gives developer extended delay rights |
| Deposit holding | Deposits held in solicitor's trust account - not released to developer before settlement | Deposits held by developer or in non-statutory account |
| Cooling off period | Confirm the cooling off period in your state - varies from 5 to 10 business days | No cooling off period - may apply in some commercial contexts |
| Body corporate levies | Estimated levies disclosed - basis of estimate explained | No levy estimate provided or levy estimate basis not explained |
| Developer's obligations | Specific completion obligations - what the developer must deliver | Vague completion obligations - developer has broad discretion |
| Title registration | Timeframe for title registration after practical completion | No timeframe specified for title registration |
| Defects liability | Developer's obligations to rectify defects after settlement - timeframe and scope | Short defects liability period - less than 12 months |
| Force majeure | Scope of events that excuse developer from performance | Broad force majeure clause - developer can claim excuse for wide range of events |
State-by-state off-the-plan buyer protections
| State | Cooling off period | Deposit cap | Deposit holding requirements | Key legislation |
|---|---|---|---|---|
| Queensland | 5 business days | 10 percent | Solicitor's or agent's trust account | Body Corporate and Community Management Act, Property Occupations Act |
| New South Wales | 5 business days | 10 percent - 0.25 percent exchange deposit with balance on sunset | Solicitor's trust account | Conveyancing Act 1919, Residential Apartment Buildings Act |
| Victoria | 3 business days | 10 percent | Legal practitioner's or conveyancer's trust account | Sale of Land Act 1962, Owners Corporations Act |
| Western Australia | 3 business days | 10 percent | Agent's or solicitor's trust account | Sale of Land Act 1970 |
| South Australia | 2 business days | No statutory cap - market practice is 10 percent | Agent's or solicitor's trust account | Land and Business (Sale and Conveyancing) Act |
| Australian Capital Territory | 5 business days | 10 percent | Solicitor's or conveyancer's trust account | Civil Law (Sale of Residential Property) Act |
Important note: Off-the-plan legislation changes periodically. Always confirm the current requirements in your state with a property lawyer before signing any off-the-plan contract.
Before you sign an off-the-plan contract checklist
Engage a property lawyer to review the complete contract before signing - not after
Research the developer's completed project history - confirm comparable completed projects exist and visit at least one
Search the developer's company through ASIC Connect - confirm good standing and no director insolvency history
Read the building specification in the contract - not the marketing brochure - and confirm all materials and finishes are specified with sufficient detail to be enforceable
Review the substitution clause - confirm substitution is limited to equivalent or better quality
Confirm the sunset date - assess whether it is realistic for the project scope and market conditions
Confirm deposit holding arrangements - deposits must be held in a solicitor's trust account
Obtain the estimated body corporate levies - confirm the basis of the estimate and whether it includes a sinking fund contribution
Obtain independent financial advice on your ability to settle at the contract price if the market moves and if interest rates change between signing and settlement
Confirm your understanding of the cooling off period in your state and exercise it if you have any unresolved concerns after signing
Do not sign under sales pressure - off-the-plan contracts are significant financial commitments that deserve thorough review regardless of how urgent the developer's sales team represents the timeline to be
Red flags
BUILTLY and off-the-plan due diligence
The most reliable protection against off-the-plan risk is independently verified evidence of what a developer has actually delivered in the past.
BUILTLY is building a record of completed Australian homes that credits the builder, architects, designers and trades behind each one.
BUILTLY is building a record of completed Australian homes that credits the builder, designers and trades behind each one.
Frequently Asked Questions
What are the main risks of buying off-the-plan in Australia?
The main risks of buying off-the-plan in Australia are developer insolvency - where the developer cannot complete the project and the buyer may lose their deposit - valuation shortfall at settlement - where the completed property is valued below the purchase price by the buyer's bank - specification substitution - where the developer replaces specified materials with inferior alternatives - sunset clause exploitation - where the developer deliberately delays to terminate the contract and resell at higher prices - and market decline - where property values fall significantly between contract and settlement. Understanding each risk and how to mitigate it before signing is the foundation of responsible off-the-plan purchasing.
How can I protect myself when buying off-the-plan in Australia?
Engage a property lawyer to review the complete contract before signing. Research the developer's completed project history and verify their company standing through ASIC. Read the building specification in the contract - not the marketing brochure - and confirm all materials and finishes are described with sufficient specificity to be enforceable. Review the substitution clause and sunset clause carefully. Confirm deposits are held in a solicitor's trust account. Obtain independent financial advice on your ability to settle at the contract price if the market moves or interest rates change. Never sign under sales pressure without adequate time for review.
What is a sunset clause in an off-the-plan contract?
A sunset clause is a provision that sets a date by which the building must be completed and the title registered - or either party can terminate the contract and the deposit is returned. It protects buyers from being locked into a contract for a perpetually delayed project. However in rising markets some developers have deliberately delayed construction to allow the sunset clause to expire - enabling them to resell at higher prices. New South Wales, Victoria and Queensland have introduced legislative protections against sunset clause exploitation. Confirm the applicable protections in your state with a property lawyer before signing.
What happens to my deposit if the developer goes broke?
In most Australian states, off-the-plan deposits must be held in a solicitor's trust account and cannot be released to the developer before settlement. If the developer becomes insolvent before settlement, the deposit held in trust should be returned to the buyer. If the developer has released deposits improperly - in breach of the trust account requirements - buyers may become unsecured creditors with limited recovery prospects. Always confirm in the contract that your deposit will be held in a solicitor's trust account and that it cannot be released to the developer before settlement. This is one of the most important protections to confirm before signing.
Is buying off-the-plan a good investment in Australia?
Off-the-plan purchasing can be a sound investment decision in the right circumstances - buying from a developer with a strong completed project history, in a location with strong demand fundamentals, at a price that reflects the completed value rather than a significant premium and with a contract that provides adequate buyer protections. It requires significantly more due diligence than purchasing an established property and carries risks that established property purchases do not. The critical variables are developer quality, location fundamentals, contract protections and the buyer's financial resilience to absorb adverse outcomes between signing and settlement.