Advice

Bifold and Stacking Doors Australia: Costs, Types and What to Know

Bifold and stacking doors are the defining feature of indoor-outdoor living in Australian homes. They open up an entire wall to a patio, alfresco area or garden - blurring the boundary between inside and outside in a way that no other door system can match. They are also a significant cost decision, a permanent architectural commitment and one of the most common specification questions in new builds and renovations. This guide covers what bifold and stacking doors cost in Australia in 2026, how the two systems differ, what materials are available and what to consider before you specify.

Last updated: October 2026

What are bifold doors?

Bifold doors consist of multiple panels connected by hinges that fold back on themselves in a concertina or accordion pattern when opened. The panels stack neatly to one or both sides of the opening, creating a wide, largely unobstructed aperture. When fully open, bifold doors can effectively remove an entire wall from view, creating a seamless connection between indoor and outdoor spaces.

Bifold doors are sometimes called folding sliding doors, concertina doors or accordion doors. They operate on a top-hung or bottom-rolling track system and can be configured to fold to one side, both sides, or in a combination that includes a fixed panel.

What are stacking doors?

Stacking doors - also called stacker doors or multi-stack sliding doors - consist of multiple panels that slide horizontally along a track and stack neatly behind one another when opened. Unlike bifold doors, the panels do not fold. They slide and collect each other progressively until they are stacked at one end of the opening behind a fixed panel.

The key practical difference is that stacking doors always retain one fixed panel in the opening when fully open - the panel against which the others stack. Bifold doors can potentially clear the entire opening when folded to the side. However, stacking doors require less clearance space to operate because the panels do not swing or fold.

Bifold vs stacking doors - which is right for your home?

FeatureBifold doorsStacking doors
Opening widthUp to 100% of the opening can be clearedOne fixed panel always remains - typically 75 to 85% clears
Space requiredMore - panels fold out and require clearanceLess - panels slide within the track
Appearance when closedMore framing visible - smaller individual panelsLess framing, larger panels - cleaner view
Appearance when openNear complete opening, dramatic effectWide opening with fixed panel remaining
Panel sizeSmaller individual panelsLarger individual panels
CostHigher - more hardware, hinges and moving partsLower - simpler mechanism, less hardware
MaintenanceMore moving parts - hinges, tracks, locking boltsSimpler mechanism - rollers replaceable
Screening optionsRetractable flyscreen required - adds $800 to $1,500+Can accommodate stacking flyscreens on 3-panel systems
Best forMaximum opening, resort-style aestheticLarger openings, everyday use, frequent opening/closing

Choose bifold doors if:

  • You want to maximise the opening and essentially remove the wall
  • The space will be fully open most of the time - outdoor entertaining focus
  • You have the clearance space on at least one side for the folded panels
  • You want the dramatic resort-style aesthetic bifolds deliver

Choose stacking doors if:

  • You want larger glass panels and less visible framing when closed - cleaner view year-round
  • You open and close the doors frequently throughout the day
  • Clearance space alongside the opening is limited
  • Budget is a consideration - stacking doors are generally cheaper

How much do bifold and stacking doors cost in Australia?

Door typePanelsOpening widthSupply onlyInstalled
Aluminium bifold - standard3 panels2.4 - 3.0m$2,500 - $4,500$3,500 - $6,000
Aluminium bifold - standard4 panels3.0 - 4.2m$3,500 - $6,000$5,000 - $8,500
Aluminium bifold - large5-6 panels4.0 - 6.0m$5,000 - $9,000$7,000 - $13,000
Aluminium stacking - standard3 panels2.4 - 3.6m$1,500 - $4,000$2,500 - $5,500
Aluminium stacking - large4-5 panels3.6 - 6.0m$3,000 - $6,500$4,500 - $9,000
Timber bifold3-4 panels2.4 - 4.2m$2,800 - $5,500$4,000 - $7,500
Double glazed upgradePer system-Add $800 - $2,500-
Retractable flyscreenPer system-Add $800 - $1,500-

Note: Prices are indicative for 2026. Supply-only prices do not include installation, structural modifications to the opening, or finishing work. Installation cost depends on whether the opening is existing or new, whether structural work is required and the complexity of the wall construction. Compare frame and thermal-performance considerations in our guide to aluminium windows when specifying the adjoining door system. If the opening affects structure, learn how to choose a structural engineer before ordering the door system.

Indicative cost

Standard 4-panel aluminium bifold door - $3,500 to $6,000 supply | $5,000 to $8,500 installed

Door materials

Aluminium

Aluminium is the dominant material for bifold and stacking doors in Australian residential construction. It is lightweight, strong, durable, low maintenance and available in a wide range of powder coat colours to suit any home palette. Aluminium does not rot, warp or require periodic painting.

For energy performance, standard aluminium frames conduct heat readily and can reduce the thermal efficiency of the door system. For homes targeting NatHERS 7-star compliance or where thermal comfort is a priority, thermally broken aluminium frames - which incorporate a non-conductive barrier in the frame profile - deliver significantly better performance. Double glazing combined with thermally broken frames is now the recommended specification for bifold and stacking doors in most Australian climate zones.

Aluminium bifold doors are the most common residential specification in Australia and represent the best balance of cost, performance, durability and aesthetic for most applications.

Indicative cost

Aluminium bifold doors - $2,500 to $9,000+ supply depending on size and panel count

Timber

Timber bifold doors suit heritage, traditional and architecturally distinctive homes where the warmth and character of natural timber is preferred. Hardwood species including Meranti, Merbau and Western Red Cedar are commonly used for external bifold applications. For luxury homes, timber bifolds offer an unmatched aesthetic.

Timber requires periodic painting, oiling or staining to protect against moisture and UV degradation. In coastal environments, timber maintenance requirements are more demanding. Timber doors are typically custom-made and priced accordingly. Timber can cost more, depending on species, dimensions, finish and hardware.

Indicative cost

Timber bifold doors - $2,800 to $5,500+ supply for standard configurations

uPVC

uPVC bifold doors offer good thermal performance and low maintenance - the same material advantages as uPVC windows. They are less common in the Australian market than aluminium but are growing in availability. uPVC is the most affordable frame material for bifold applications. The profile is typically bulkier than aluminium, which can affect the aesthetic in contemporary architectural contexts.

Glazing options

Single glazing

Single glazed bifold and stacking doors are the entry-level specification. Appropriate for internal applications - dividing rooms, closing off a study or home office - but not recommended for external doors where thermal performance and weather sealing matter.

Double glazing

Double glazed bifold and stacking doors incorporate two panes of glass with an insulating gas-filled gap, providing significantly better thermal and acoustic performance than single glazed equivalents. Double glazing adds $800 to $2,500 to the cost of a standard bifold system but is increasingly specified as standard for external doors in new builds targeting 7-star NatHERS compliance.

In cooler climate zones - Melbourne, Adelaide, Canberra and Hobart - double glazed external bifold and stacking doors deliver meaningful year-round comfort improvement. In subtropical and tropical climates, the primary benefit is acoustic performance and solar control rather than insulation.

Low-E glass

Low-emissivity (Low-E) glass can be specified for bifold and stacking door systems in the same way as for windows. Solar control Low-E glass reduces heat entering through west and north-facing doors in summer - a significant benefit for large glazed door openings that face afternoon sun.

What to consider before you specify

Opening width and panel configuration

The width of the opening determines the panel count and configuration. Wider openings require more panels. More panels mean more hinges, more hardware and more cost. For very wide openings - 5 metres or more - consider whether stacking doors with fewer, larger panels might deliver a cleaner result.

Structural requirements

Bifold and stacking door openings require a structural lintel or beam spanning the opening. For openings created in existing walls, a structural engineer must design the beam and the existing structure must be assessed for the additional load. For new builds, the opening is designed into the structural frame from the start as part of the building checklist. Always confirm structural requirements before budgeting.

Floor level and track

The transition between interior and outdoor floor levels affects the track specification. For a flush threshold - where interior and exterior floors meet at the same level - recessed track systems are available but require careful waterproofing and drainage detailing. A step threshold is simpler and more weather-resistant but less seamless aesthetically.

Direction of opening

Bifold doors can be configured to fold inward, outward or both. Outward-folding doors require clearance space outside the opening - important to consider if the alfresco area is small. Inward-folding doors require clearance inside. The direction of folding affects furniture placement and the practical usability of the space.

Screening

Flyscreens are an important practical consideration in the Australian climate. Bifold doors require a retractable flyscreen system, typically housed in a cassette at one end of the opening. These add $800 to $1,500 to the project cost but are strongly recommended. Stacking doors on 3-panel configurations can often accommodate stacking flyscreens on the same track system, which is simpler and less expensive.

Hardware, weather sealing and maintenance checks

Ask the supplier to confirm that the tracks, rollers, hinges and pivots are rated for the actual glazed panel weight. Larger panels and double glazing increase the load. At handover, operate every panel and check that it moves without binding and that all locking points engage.

Check panel alignment and continuous contact at perimeter and panel-to-panel seals. Confirm that track drainage outlets discharge outside and remain clear. For exposed openings, ask for the proposed system's tested weather performance and installation details rather than assuming either door type will perform adequately.

Bifolds introduce more hinges, pivots and folding junctions to inspect; stackers rely on clean tracks and correctly adjusted rollers. Follow the manufacturer's cleaning and lubrication instructions, inspect seals for wear and arrange adjustment when panels begin to drag. In coastal locations, confirm the hardware finish and maintenance requirements are suitable for salt exposure.

Bifold and stacking doors in new builds vs renovations

Installing bifold or stacking doors in a new build is significantly simpler and cheaper than retrofitting them into an existing home. In a new build the opening is designed into the structural frame from the start, the lintel is specified and installed as part of the build and there is no existing wall to remove or make good.

Retrofitting bifold or stacking doors into an existing home involves removing the existing wall or doors, assessing the structural implications, installing a new lintel if required and making good the surrounding wall, floor and ceiling. Total renovation cost for a retrofitted bifold door opening is typically $8,000 to $20,000 including structural work, doors and installation. For more on renovation costs, see our guide on home extension costs.

Engaging an architect or building designer when planning a significant opening change in an existing home is recommended - they can design the structural solution and confirm council requirements before you commit to the project.

How BUILTLY helps

BUILTLY is building a record of completed Australian homes that credits the builder, designers and trades behind each one.

Frequently asked questions

How much do bifold doors cost in Australia?

Aluminium bifold doors in Australia cost $2,500 to $4,500 for a standard 3-panel system supply-only, or $3,500 to $6,000 installed. A 4-panel system costs $3,500 to $6,000 supply or $5,000 to $8,500 installed. Larger 5 to 6-panel systems cost $5,000 to $9,000 supply or $7,000 to $13,000 installed. Timber can cost more, depending on species, dimensions, finish and hardware. Double glazing and retractable flyscreens each add $800 to $1,500 to the total.

What is the difference between bifold and stacking doors?

Bifold doors fold back on themselves in a concertina pattern and can clear almost the entire opening when open. Stacking doors slide horizontally and stack behind a fixed panel, always leaving one panel in the opening. Bifold doors create a more dramatic opening and resort-style aesthetic but cost more and require more clearance space. Stacking doors have larger individual panels, a cleaner appearance when closed, less visible framing and are generally cheaper and easier to maintain.

Are bifold doors worth the extra cost over stacking doors?

It depends on how you will use the space. If the doors will be fully open most of the time and you want the maximum opening and a dramatic indoor-outdoor connection, bifold doors are worth the premium. If you open and close the doors frequently throughout the day, want a cleaner view when closed and have a larger opening, stacking doors typically deliver better everyday usability at a lower cost. Both are excellent choices - the right answer depends on your specific space and lifestyle.

Do bifold doors need planning approval in Australia?

Standard bifold door installations replacing existing openings do not generally require council approval. Creating a new opening in an existing wall - particularly a structural wall - requires a building permit in most states because structural work is involved. In heritage-listed properties or those with character overlays, external door changes may also require approval. Confirm requirements with your local council before commencing any work that involves modifying a structural wall.

Can bifold doors be double glazed in Australia?

Yes - double glazed bifold and stacking doors are readily available from Australian suppliers and are increasingly specified as standard for new builds and renovations. Double glazing improves thermal and acoustic performance and is recommended for external bifold and stacking doors in all but the hottest climate zones. Adding double glazing to a standard bifold system adds approximately $800 to $2,500 to the total cost depending on system size.

Related guides