Advice

Retractable flyscreens cost in Australia

Last updated: October 2026 ·

Retractable flyscreens are the screening solution most Australian households end up using on large openings, and they are one of the most commonly underestimated line items in a door package. A single unit on a modest doorway can cost a few hundred dollars, while a paired system across a six metre bifold opening can run past $2,800 installed.

The wide spread in pricing is not arbitrary. It reflects opening width, whether the system is side-mounted or overhead, the quality of the retraction mechanism, and whether the screen is being fitted into a finished opening or specified as part of the original build. Those four variables account for most of the difference between a $450 quote and a $2,500 quote.

This guide sets out realistic Australian cost ranges by type and size, explains what actually drives the price, and covers the practical checks worth making before you sign a quote. It is written as a cost guide rather than a product brochure, so it does not recommend a brand or a proprietary system.

For the broader context on how door and window packages fit into a residential build programme and budget, refer to the BUILTLY complete guide to building a house in Australia.

What retractable flyscreens are and where they are used

A retractable flyscreen is a mesh screen wound onto a spring-loaded roller housed in a slim cassette. The mesh is drawn across the opening on a guided track and held by a magnetic or latching edge strip, then retracts back into the cassette when it is not needed. Unlike a fixed screen, it is only visible when it is in use.

The reason retractable systems dominate large openings is structural rather than aesthetic. A conventional sliding or hinged flyscreen needs a frame to sit in and a place to park when open. Bifold doors fold their panels back against the reveal and leave no parking space. Stacking doors stack panels over each other and occupy the same track zone a screen would use. On both, a retractable cassette mounted to one side, or across the head, is often the only workable answer.

Typical applications in Australian homes include bifold and stacking door openings onto alfresco areas, wide sliding doors, servery windows to outdoor kitchens, and single hinged doors where a permanently fitted screen would spoil an entry. They are also used on large fixed-glass and awning window arrangements where a hinged screen would obstruct the view.

Fixed flyscreens remain the cheaper and more durable choice for standard windows and single sliding doors. A retractable system introduces moving parts, and moving parts are the component that eventually wears. That trade-off is the core of the decision, and it is covered in detail further down this guide.

Where retractable systems are specified alongside a large door package, they should be treated as part of that package rather than a later accessory. Openings of this size are covered in the BUILTLY guide to bifold doors in Australia, which sets out how the panel configuration itself affects what can be screened.

Cost by type and size

Retractable flyscreens are priced primarily on opening width and mechanism type. The two dominant configurations in the Australian market are side-mounted vertical systems, where the mesh travels horizontally from a cassette at one jamb, and top-down overhead systems, where the mesh drops from a head-mounted cassette.

Side-mounted retractable systems

Side-mounted units are the most common. The cassette sits vertically against one jamb, and the mesh pulls across on a top guide and a low-profile bottom track. They suit door openings and wide window openings, and they are the standard answer on bifold and stacking doors.

Indicative supplied and installed ranges:

  • Single unit, opening up to 1.2 metres wide: $450 to $900
  • Single unit, 1.2 to 1.8 metres: $650 to $1,200
  • Paired double system, 2.4 to 3 metres: $900 to $1,800
  • Paired double system, 3.6 to 4.8 metres: $1,200 to $2,200
  • Paired double system, 4.8 to 6 metres: $1,600 to $2,800

Top-down and overhead systems

Overhead systems drop the mesh vertically from a cassette fixed at the head of the opening. They are used where there is no usable jamb space for a side cassette, where the opening is very wide, or where a full-height mesh curtain is wanted across an alfresco edge.

Indicative supplied and installed ranges:

  • Manual overhead, up to 3 metres wide: $1,100 to $2,000
  • Manual overhead, 3 to 5 metres: $1,800 to $3,200
  • Motorised overhead, up to 4 metres: $2,600 to $4,500
  • Motorised overhead, over 4 metres or with wind sensors: $4,000 and above

Single versus paired configurations

On openings wider than roughly two metres, a single screen becomes difficult to operate. The mesh is heavier, the pull force increases, and the risk of the mesh skewing in the track rises. Suppliers respond by pairing two units, one at each jamb, meeting with magnetic edge strips in the middle.

A paired system is not double the price of a single unit, because the tracks are shared and installation is a single visit, but it is usually 60 to 80 percent more than a single of equivalent total width. The centre meeting strip is also the most common source of complaints about light gaps and insect ingress, so it is worth inspecting a working sample before committing.

Where a project involves multiple openings, per-opening rates drop. A supplier fitting four units in one visit will typically price 10 to 20 percent below the equivalent single-opening rate, because measurement, travel and setup are amortised across the job.

What affects the price

Two quotes for the same opening can differ by more than a thousand dollars. The following variables explain most of that gap.

Opening size

Width drives cost more than height. Wider mesh spans require heavier rollers, stronger brake mechanisms and more accurate track alignment. Above about 3 metres, most suppliers move to paired units and heavier extrusions, which is where pricing steps up rather than rising smoothly.

Track and mechanism quality

The retraction mechanism is where budget and premium systems genuinely differ. A controlled brake that returns the mesh slowly costs more than a plain spring roller that snaps it back, but it is the single biggest determinant of how long the unit lasts. Bottom track profile matters too: a recessed or very low-profile track is dearer than a surface-mounted one but avoids a trip hazard.

Mesh specification

Standard fibreglass mesh is the base offering. Pet-resistant mesh, finer midge mesh for coastal and tropical areas, and higher-visibility mesh each add cost, typically 10 to 25 percent on the mesh component. In coastal locations, corrosion-resistant hardware and coated components add further.

Retrofit versus specified during build

Retrofitting into a finished opening carries labour and finishing costs that a new build installation avoids. Out-of-square reveals need packing, surface-mounted tracks need sealing, and tiled or timber thresholds may need cutting. This is covered in detail in the next section.

Number of openings

Per-unit costs fall as volume rises. If several openings are being screened, quote them together rather than one at a time.

Colour and finish matching

Standard powder coat colours are included. Matching a non-standard door colour, or a custom finish specified across a window suite, commonly adds $100 to $300 per unit and extends lead times. Where the door package uses a particular finish, the guide to aluminium windows in Australia explains how frame finishes are specified and why matching later is harder than matching upfront.

Retrofit vs specifying during construction

The screen hardware costs roughly the same whenever you buy it. The difference lies in how it integrates with the opening, and that difference is both financial and visual.

What changes when the screen is specified during the build

When a retractable screen is part of the original door package, the head track can be recessed into the reveal or a bulkhead so no cassette rail is visible below the ceiling line. The bottom track can be set into the floor before tiling, decking or floor levelling, producing a flush threshold rather than a raised strip. The side cassette can be planned into the reveal return so it reads as part of the door frame rather than an addition bolted to it. Where a motorised overhead system is a possibility, the supply to the head track belongs on the electrical plan at the same stage, which is covered in the guide to smart home wiring and infrastructure in Australia.

There is also a coordination benefit. The door supplier and the screen supplier work to the same set-out, so the screen tracks do not collide with door hardware, and the door installer knows where the screen fixings will land. On bifold openings in particular, the folding panels sweep through the reveal, and a retrofitted cassette placed without that knowledge can foul the panel stack.

What retrofitting typically adds

  • Surface-mounted tracks with visible fixings and sealant lines
  • Packing to correct reveals that are out of square or out of plumb
  • A raised bottom track across the threshold, which becomes a trip point and a dirt trap
  • Potential cutting into a finished tile, stone or timber threshold
  • Colour matching to a door finish that may no longer be a current stock colour
  • A second trade attendance and separate measurement visit

On a straightforward single door, retrofitting adds little. On a wide bifold or stacking opening with a level threshold detail, retrofitting commonly adds $300 to $800 per opening in labour and finishing, and it frequently produces a worse visual result. That is the practical reason specifying early is usually the cleaner and sometimes the cheaper path.

Watch the level threshold detail

Level or near-level thresholds onto alfresco areas are common in contemporary Australian homes, and they are the detail most often compromised by a retrofitted screen. The waterproofing and drainage set-out is already fixed, so the bottom track usually has to sit on top of the finished surface. Where a flush threshold is important to you, raise the screen with your builder before the slab and floor levels are set.

What to check before installation

Most complaints about retractable flyscreens trace back to three things: track alignment, mesh specification and warranty scope on the mechanism. Check each before accepting a quote.

Track alignment and opening tolerance

A retractable screen only runs smoothly if the top and bottom tracks are parallel and the cassette is plumb. Ask the installer to measure the opening at three points across the width and confirm the variance. Older homes and openings that have settled can be out by 10 millimetres or more, which the installer must correct with packing rather than force the mesh to absorb.

Ask specifically what happens to the bottom track at the threshold: whether it is recessed, surface fixed, or bridged over an existing sill, and how it is sealed. This is the detail that determines whether the screen jams after twelve months of grit collecting in the channel.

Mesh quality and durability

Confirm the mesh type in writing, not just the grade name used in the showroom. In coastal and tropical areas, ask whether the mesh and hardware are rated for the exposure, and whether the fixings are stainless. Pet-resistant mesh is heavier and puts more load on the roller, so confirm the mechanism is rated for the mesh actually being supplied rather than the standard mesh the system was priced with.

Warranty terms on the mechanism

This is the check that matters most over time. Many warranties advertise a long headline term that applies to the powder coat finish and the extrusions, while the spring, brake and guides carry a much shorter term. The mechanism is the component that fails, so read the exclusions.

Specifically confirm:

  • The separate warranty term applying to the retraction mechanism, spring and brake
  • Whether labour to attend and repair is included, or parts only
  • Whether the warranty is void if the screen is installed in a coastal zone without the corrosion-resistant option
  • Who honours the warranty if the installer is a reseller rather than the manufacturer
  • Whether periodic cleaning of the tracks is a condition of cover

Where the screens form part of a larger contract with a builder rather than a direct supply arrangement, confirm the licensing and insurance position of the party doing the work. The BUILTLY guides on how to check a builder's licence in Australia and construction insurance in Australia set out how to verify both before work starts.

Screens also interact with the rest of the door package. Locks, handles, rollers and multi-point hardware share the same reveal and can conflict with a screen cassette, which is covered in the guide to door and window hardware in Australia.

Retractable vs fixed flyscreens: which suits your opening

Neither type is better in general terms. They solve different problems, and the honest answer depends on the opening.

Where fixed screens are the better choice

On standard windows, single sliding doors and openings where the screen can stay in place year round, a fixed screen is cheaper to buy, cheaper to replace and has nothing to wear out. A fixed screen on a typical window costs $80 to $200 supplied and installed. If the view is not the priority and the opening has a frame to hang from, a fixed screen will usually give better value over its life.

Where retractable screens are the better choice

On bifold and stacking openings there is often no alternative, because the panels occupy the space a fixed screen would need. Retractable systems also suit openings where the unobstructed view matters, where the screen is only needed seasonally, and where a permanently fitted mesh would darken the room.

The honest trade-off

Retractable systems cost roughly three to ten times what a comparable fixed screen costs, and they contain the only components in the assembly that can fail mechanically. In exchange you get a clear opening when the screen is not in use and a workable solution on openings that cannot be screened any other way.

A reasonable rule of thumb for Australian homes: use fixed screens wherever a frame allows it, and reserve retractable systems for the openings where the door type or the view genuinely requires one. That approach controls both upfront cost and long-term maintenance exposure. For openings still being chosen, the comparison in the guide to stacker doors vs bifold doors in Australia is worth reading before the screening decision is locked in.

BUILTLY and lasting project records

BUILTLY is building a record of completed Australian homes that credits the builder, designers and trades behind each one.

For screening and door packages specifically, that record matters because the failure point appears years after handover. When a retractable mechanism stops retracting in year four, an owner with a published project record can identify who supplied and installed the system and what was specified, instead of reconstructing it from memory. Builders and installers who publish their completed work carry the same evidence forward into the next quote.

Frequently asked questions

How much does a retractable flyscreen cost in Australia?

A single side-mounted retractable flyscreen for a standard hinged or sliding door opening up to about 1.2 metres wide typically costs $450 to $900 supplied and installed. A paired double system across a 2.4 to 3 metre opening usually costs $900 to $1,800. Wide bifold or stacking door openings from 3.6 to 6 metres generally cost $1,200 to $2,800 depending on mesh, track quality and whether the head track can be recessed. Premium motorised overhead systems on very large openings can exceed $4,000. These are general market ranges and quotes vary by supplier, region and access.

Are retractable flyscreens worth it on bifold doors?

For most Australian households a retractable system is the only practical way to screen a bifold opening, because the panels fold back against the reveal and leave no fixed frame to hang a conventional screen on. The value question is less about whether to screen the opening and more about the quality of the mechanism you choose. A cheap retractable unit on a wide, exposed opening will usually fail within a few years, while a well specified system with a quality brake mechanism and a properly aligned bottom track will run smoothly for a decade or more.

Is it cheaper to fit retractable flyscreens during construction?

Often, yes. When the screen is specified alongside the door package, the head track can be recessed into the reveal or bulkhead, the bottom track can be set into the floor finish before tiling or decking, and the installer measures a known opening rather than a finished one. Retrofitting usually means surface-mounted tracks, packers to correct out-of-square reveals, and a visible bottom track that becomes a trip point. The screen hardware itself costs much the same either way, but the integration and finishing work is cleaner and often cheaper when it is planned in.

How long do retractable flyscreens last?

The mesh and frame usually outlast the retraction mechanism. Quality systems with a controlled brake and stainless or coated components commonly last 10 to 15 years in a sheltered opening, less in a coastal or heavily used one. Budget systems with a plain spring roller and light guides often start binding or failing to retract within three to five years. Warranty terms are the clearest indicator: check whether the mechanism itself carries the same term as the frame, because many warranties cover the powder coat and mesh far longer than the moving parts.

Can retractable flyscreens be fitted to any opening?

Most openings can be screened, but not all can be screened neatly. The mechanism needs a straight, plumb reveal on the housing side, a level head for the top track and a clean line for the bottom track. Very wide openings, out-of-square reveals in older homes, tiled thresholds with falls to drainage, and openings with limited return space for the cassette all make installation harder and more expensive. A reputable installer will measure the opening and tell you honestly where the compromises will be before quoting.