Advice

Window furnishings and blinds in Australia

Last updated: October 2026 ·

Window furnishings are usually treated as the last decision in a residential project. Blinds, curtains and shutters are selected after the build is finished, often from a showroom or an online measure and quote, and the conversation is about fabric, colour and price. That framing misses half the picture.

Window coverings carry two dimensions that matter well beyond appearance. The first is functional and financial. A whole house of blinds is rarely a small line item, the range between entry level and quality product is very wide, and decisions about recessed head boxes, pelmets and concealed cabling have to be made long before the product is ordered. The second is safety compliance. Corded internal window coverings are subject to a mandatory Australian product safety standard because loose cords and chains present a strangulation risk to young children, and that obligation applies to what is supplied and installed today, not only to new houses.

This guide covers the main types of window furnishing, what the corded blind safety rules actually require, where motorised and smart products sit on cost and complexity, realistic price ranges, and the checks worth making before anything is fitted. It is written as a specification and compliance guide rather than a product brochure, so it does not recommend a brand or a proprietary system.

For the wider context on how fixture and finish packages sit inside a residential build budget and programme, refer to the BUILTLY complete guide to building a house in Australia.

Why window furnishings matter more than they appear to

Window coverings do real work in an Australian house. They control glare and heat gain on western and northern elevations, they provide the privacy that large glazed areas remove, and they contribute to the thermal performance of the building envelope. A well fitted blockout roller with side channels or a lined curtain with a closed pelmet reduces the heat transfer through glazing in a way that a loosely hung blind does not.

They also sit in an awkward contractual position. On many residential contracts, window furnishings are excluded from the build and left to the owner to arrange after handover. That makes them easy to overlook when the budget is set, and it means the person installing them is often a separate supplier with no relationship to the builder. The distinction between what forms part of the building work and what the owner supplies later is covered in the guide to fixtures and fittings explained in Australia, which is worth reading before signing anything that lists window coverings as an exclusion.

The practical consequence is that decisions with permanent effects get made in the wrong order. Recesses, cabling and fixing substrates are building work. The blind is a product. If the product is chosen after the building work is closed up, the product has to be adapted to the house instead of the other way around.

Types of window furnishings

Most Australian houses use a combination of three families rather than a single product across every opening. The choice usually comes down to light control, privacy at night, cleaning, and how much of the reveal the product is allowed to occupy.

Blinds

Roller blinds are the most common option in new residential work. They are compact, inexpensive at the entry level, and available in a range from sunscreen fabrics that preserve the view to blockout fabrics for bedrooms. Dual roller systems combine both on one bracket. Their weakness is light leakage down the sides unless side channels are specified.

Venetian blinds use horizontal slats in aluminium, timber or a composite, and give fine control over glare because the slat angle can be adjusted independently of the blind height. They collect dust and take longer to clean than a flat roller. Roman blinds use soft fabric drawn up in horizontal folds and read as a curtain when lowered, which suits living areas but adds bulk at the head of the window.

Honeycomb or cellular blinds sit slightly outside these categories and are chosen mainly for thermal performance, since the cell structure traps a layer of air against the glass.

Curtains

Curtains give the best acoustic and thermal result of the three families when they are properly specified, meaning a lined or blockout fabric, generous fullness, a track that returns to the wall, and either a pelmet or a ceiling recess that stops warm air circulating behind the fabric. Sheer curtains layered over a blind are a common combination in living spaces. Curtains need wall or ceiling space either side of the opening, so they have to be planned before the room is set out.

Plantation shutters

Plantation shutters are hinged or sliding panels of wide adjustable louvres, made in timber, a composite or PVC. They are the most expensive common option and the most durable, they suit wet areas well in PVC or aluminium, and they read as part of the building rather than a soft furnishing. They occupy depth in the reveal, so the window frame and any security screen or flyscreen has to be checked for clearance before ordering.

Blind cord safety: what the law requires

Corded internal window coverings are one of the few household products in Australia governed by a mandatory consumer product safety standard. The reason is specific and serious. A loose cord or chain loop hanging within reach of a cot, bed or sofa can form a loop around a small child's neck, and fatalities in Australian homes are the reason regulation exists at all.

Two separate instruments apply. Mandatory information requirements for corded internal window coverings have been in force since 2010, and the current mandatory safety standard for corded internal window coverings dates from 2014 and applies to products supplied and installed today. The Australian standard commonly referenced by the industry for the safety of corded internal window coverings sits behind these instruments and sets out the technical detail on cord length, loop formation and the devices used to control them.

Two points about scope are frequently misunderstood. The obligation falls on suppliers and installers, not on homeowners, and it applies at the point the product is supplied or installed. It is not limited to new houses. A replacement blind fitted in a forty year old home carries exactly the same requirement as one fitted in a new build.

What compliance actually requires

In practical terms, a compliant installation has to prevent a loose cord or chain from forming a hazardous loop within reach of the floor. Installers meet that with a small number of standard measures.

  • Cord cleats. A fixed cleat mounted on the wall or frame, at a height out of a child's reach, that the loose cord is wound onto after every operation. Simple, cheap and dependent on the household using it every time.
  • Tension devices. A bracket that holds a continuous chain or cord loop taut and fixed to the wall or frame so no slack loop can form. This is the standard solution for chain operated roller and vertical blinds and does not depend on user behaviour.
  • Breakaway connectors. A fitting in the cord or chain designed to separate under load so that a loop cannot sustain weight if a child becomes entangled.
  • Warning labels and instructions. The product must carry the prescribed warning about the strangulation hazard, and the installer must leave the installation instructions and the required safety information with the customer.

The most common failure mode is not a non compliant product. It is a compliant product supplied with a tension device or cleat that is never fixed to the wall, left loose in the packaging or in a kitchen drawer. An uninstalled safety device is not compliance. Confirm at handover that every corded blind in the house has its device physically fixed and in use.

The most reliable way to remove the risk is to remove the cord. Cordless spring operated blinds, wand operated venetians, motorised products and plantation shutters have no accessible cord loop at all. Where a house has young children or is likely to, specifying cordless or motorised in bedrooms and living areas resolves the issue by design rather than by device.

Motorised and smart blinds

Motorisation has moved from a premium extra to a mainstream option in Australian residential work, driven by three things. Battery and rechargeable tubular motors removed the need for cabling on retrofit jobs, the cost of the motors themselves fell, and integration with broader home automation made scheduled operation genuinely useful rather than a novelty.

The practical case is strongest on openings that are hard to reach, on stairwell and high level glazing, on very wide or heavy blinds where manual operation is awkward, and on west facing living areas where closing blinds on a schedule before the afternoon heat arrives has a measurable comfort benefit. Motorisation also resolves the cord safety question outright, because there is no operating cord.

Battery, rechargeable and hardwired

Battery and rechargeable motors are the simplest option and the only realistic one for most retrofits. They avoid electrical work entirely, but they need periodic recharging, which is a nuisance on high windows, and the motor is usually less powerful, which limits blind size.

Hardwired motors are the better long term answer in a new build because the low voltage or mains cabling can be run in the wall cavity before lining and terminated neatly at the head of the window. That work needs to be planned at rough in stage. Where the installation involves mains power, new circuits or new outlets, it is electrical installation work carried out by a licensed electrician, and the certificate that follows is covered in the guide to electrical compliance certificates in Australia.

Smart home integration

A motorised blind becomes a smart blind when it joins a wider system, usually through a hub that bridges the blind manufacturer's radio protocol to the household's platform. Once that bridge exists, blinds can run on schedules, respond to a temperature or light sensor, or operate as part of a scene alongside lighting and climate control. The questions worth asking a builder before committing to a platform are set out in the guide to what to ask a builder about smart home integration. What needs to be run in the walls before lining, including a supply at the head box for hardwired motors, is set out in the guide to smart home wiring and infrastructure in Australia.

Window furnishings are not the only automated opening product in a modern house, and the same planning logic applies to the others. External shutters carry their own motor, wiring and certification questions, covered in the guide to roller shutters cost in Australia, and screening products compete for the same reveal space, which is set out in the guide to retractable flyscreens cost in Australia. Where several of these are being fitted to the same openings, price and set them out together rather than in three separate quotes.

Cost considerations

The figures below are general Australian market ranges for supply and install on a standard residential window of roughly 1.2 by 1.2 metres, unless noted otherwise. Actual quotes move with size, fabric grade, hardware, access and region, so treat them as a way to sanity check a quote rather than as a price list.

TypeManual, per windowNotes
Roller blind, basic$120 to $300Sunscreen or standard blockout fabric
Roller blind, quality or dual$250 to $600Side channels add roughly $80 to $200
Venetian blind$200 to $650Timber and composite at the upper end
Roman or honeycomb blind$300 to $800Fabric grade drives most of the range
Curtains, made to measure$400 to $1,200Includes track, lining and fullness
Plantation shutters$350 to $900 per m²PVC lowest, hardwood highest

Motorisation is best treated as a separate premium rather than a different product. Expect roughly $250 to $600 per blind for battery or rechargeable motors and $400 to $900 per blind for hardwired units once the electrical work is counted. A hub, wall controls and integration into a broader platform typically adds $500 to $2,000 across the house depending on the system.

At a whole of house level, the arithmetic is worth doing before selecting. A modest four bedroom home with fifteen window openings finished in basic roller blinds commonly lands between $2,500 and $5,000. The same house in quality blinds with blockout side channels to bedrooms sits closer to $6,000 to $10,000. Plantation shutters throughout regularly exceed $20,000. Motorising every opening can add as much again as the blinds themselves.

A common and sensible compromise is to mix. Quality blockout products with side channels in bedrooms, where light control genuinely matters, motorisation limited to high or hard to reach openings, and simpler product elsewhere. That approach usually delivers most of the benefit for a fraction of the whole of house premium.

What to check before installation

Most disputes about window furnishings are about fit, finish and what was promised, and nearly all of them are avoidable with a handful of checks before the order is placed.

  • Cord safety compliance, in writing. Ask the supplier to confirm in the quote that corded products meet the mandatory safety standard for corded internal window coverings, that the required warning labels are fitted, and that tension devices or cleats will be physically installed rather than left in the packaging. Inspect this at handover, window by window.
  • Measure and fit responsibility. Confirm who measures. If the supplier measures, remakes for incorrect sizing are their cost. If you measure, they are yours. This single line is the most common source of argument on a supply and install quote.
  • Warranty on motorised mechanisms. Motors, hubs and controls usually carry a shorter warranty than the fabric or the frame, often two to five years against a longer period on the blind itself. Ask for the motor warranty separately and confirm whether labour to replace the motor is included or excluded.
  • Substrate and fixing. Heavier products, particularly shutters and wide curtain tracks, need to land on framing or proper fixings rather than plasterboard alone. On a new build, nominate the openings early so noggins can be installed before lining.
  • Clearances in the reveal. Check the blind or shutter against window handles, security screens, flyscreen tracks and door swings. Depth conflicts are discovered at installation far too often.
  • Electrical certification. For any hardwired motor, obtain the electrical safety or compliance certificate from the licensed electrician who did the work.
  • Who you are contracting with. Where the work forms part of a building contract rather than a direct supply arrangement, verify the licensing position of the contracting party using the guide on how to check a builder's licence in Australia.

It is also worth understanding how window furnishings sit in your insurance position, since owner supplied items installed after handover are treated differently from building work under many policies. The distinctions are covered in the guide to construction insurance in Australia.

BUILTLY and lasting project records

BUILTLY is building a record of completed Australian homes that credits the builder, designers and trades behind each one.

Window furnishings are a good example of why that record matters. Safety compliance on corded blinds is exactly the kind of obligation that is met once at installation and then forgotten, and the evidence of it is rarely written down anywhere. A motor fails years after handover, a new occupant with young children moves in, or a purchaser asks what was fitted and by whom. Publishing the finished project with the trades and products credited means the answer sits in a permanent record rather than in someone's memory, and builders who publish their completed work carry that evidence into the next quote.

Frequently asked questions

Are corded blinds illegal in Australia?

Corded blinds are not banned, but they are regulated. Corded internal window coverings supplied in Australia must meet the mandatory consumer product safety standard for corded internal window coverings, which requires the cord or chain to be secured so a loose loop cannot form near the floor, along with warning labels and installation instructions. Suppliers and installers carry the legal obligation. Homeowners are not prosecuted for old blinds already in the house, but any replacement, repair or new installation should meet the current requirement, and cordless or motorised products avoid the risk entirely.

How much do blinds cost per window in Australia?

Basic roller blinds on a standard bedroom window of around 1.2 by 1.2 metres commonly cost $120 to $300 supplied and installed. Quality blockout rollers, honeycomb blinds and better venetians usually sit between $250 and $600 per window. Plantation shutters are the most expensive common option at roughly $350 to $900 per square metre depending on material, and made to measure curtains with tracks and quality fabric frequently exceed $700 per window. These are general market ranges and quotes vary by size, fabric, hardware and region.

How much more do motorised blinds cost than manual?

The motor premium is typically $250 to $600 per blind for battery or rechargeable units and $400 to $900 per blind for hardwired units once the electrical work is included. Whole of house automation with a hub, wall controls and integration into a broader smart home system adds further cost on top. The premium is easiest to justify on high or hard to reach windows, on very large or heavy blinds, and where the household wants scheduled or grouped operation.

Do motorised blinds need an electrician?

Battery, rechargeable and plug in units generally do not, provided they connect to an existing compliant outlet. Hardwired motors, new circuits, new outlets and any concealed wiring in the wall or ceiling are electrical installation work and must be carried out by a licensed electrician, who is required to issue the electrical safety or compliance certificate that applies in your state or territory. Ask for that certificate at handover and keep it with the project record.

Should window furnishings be specified before or after handover?

Deciding early is usually cheaper and neater, even if the blinds are installed at the end. Recessed head boxes, curtain pelmets, blockout side channels and concealed motor cabling all depend on decisions made before the plasterboard goes on. Leaving the whole package until after handover is common and workable, but it usually means surface mounted brackets, visible cabling on hardwired units and fewer options for a flush finish.