Advice

Electrical Compliance Certificates in Australia: What to Know

Last updated: October 2026

Electrical installation work is subject to jurisdiction-specific licensing, testing and documentation requirements. A certificate records the electrical contractor's declaration for the work described; it is not a guarantee against later faults.

What is an electrical compliance certificate?

An electrical compliance certificate - called by different names in different states - is a document issued by a licensed electrical contractor confirming that electrical work they have performed complies with the Wiring Rules under AS/NZS 3000 and all applicable state electrical safety legislation. The certificate is the electrician's formal declaration that the work meets the required standard and is safe for connection to the electricity supply and occupation.

The electrical compliance certificate is not the same as an electrical inspection certificate issued by the network distributor or safety regulator - though in some states an inspection is required before or after the compliance certificate is issued. Reviewing common electrical mistakes in new builds can help you understand what the certificate is meant to safeguard against.

Electrical compliance certificate names by state

The certificate has different names in different states - which adds to the confusion. All refer to the same fundamental document - the licensed electrician's declaration that their work is compliant.

StateCertificate nameIssued byRegulatorWhen required
QueenslandCertificate of Testing and ComplianceLicensed electrical contractorElectrical Safety Office - ESOCheck the applicable installation-work triggers
New South WalesCertificate of Compliance - Electrical Work - CCEWLicensed electrical contractorNSW Fair Trading / SafeWork NSWElectrical installation work: certificate within 30 calendar days of completion
VictoriaCertificate of Electrical Safety (COES)Licensed electrical contractor - registered with Energy Safe VictoriaEnergy Safe Victoria - ESVCertificate within 30 calendar days of completion; inspection requirements differ by work type
Western AustraliaElectrical Safety CertificateLicensed electrical contractorBuilding and Energy WAAll prescribed electrical work
South AustraliaCertificate of ComplianceLicensed electrical contractorOffice of the Technical Regulator - OTRCheck the applicable installation-work triggers
Australian Capital TerritoryCertificate of ComplianceLicensed electrical contractorAccess CanberraCheck the applicable installation-work triggers
TasmaniaCustomer record of electrical work and applicable inspection-service certificatesLicensed electrical contractorConsumer, Building and Occupational Services (CBOS)Check the applicable installation-work triggers
Northern TerritoryCertificate of ComplianceLicensed electrical contractorNT WorkSafeCheck the applicable installation-work triggers

What an electrical compliance certificate covers

ElementWhat it confirmsWhy it matters
Wiring installationAll wiring has been installed in accordance with AS/NZS 3000 Australian Wiring RulesNon-compliant wiring is a fire and electrocution risk
Circuit protectionCorrect circuit breakers, residual current devices and surge protection installedCircuit protection prevents electrical fires and electrocution
Earthing and bondingEarthing system is correctly installed and connectedCorrect earthing prevents electrocution from metal surfaces
SwitchboardSwitchboard installation and labelling meets requirementsCorrect switchboard labelling is critical for safety and maintenance
Fixed appliance connectionsFixed appliances - ovens, cooktops, hot water systems, air conditioning - correctly connectedIncorrect connections are a fire and safety risk
TestingAll circuits have been tested and results recorded - insulation resistance, continuity and polarityTesting confirms the installation is safe before occupation
Smoke alarmsSmoke alarm installation complies with state requirementsSmoke alarm compliance is a specific condition of occupancy in most states
Solar and battery systemsWhere installed - solar inverter and battery system connections comply with relevant standardsSolar and battery systems have specific safety requirements beyond standard wiring

When you should receive an electrical compliance certificate

In residential construction, electrical compliance certificates should be provided at the following points:

See the companion guide Documents Your Builder Must Provide at Each Stage Australia for the complete handover document checklist.

Ask the electrical contractor which records must be supplied to you and which notices must go to the regulator or network operator. Request the project electrical records for handover.

Ask the electrical contractor which records must be supplied to you and which notices must go to the regulator or network operator. Request the project electrical records for handover.

At handover - the complete set of handover documents should include the electrical compliance certificate as a standard item

After any electrical variation during construction - if any electrical work is added or changed during construction as a variation, a compliance certificate for the varied work should be issued separately or the original certificate updated to cover the additional work

After installation of fixed appliances - if appliances such as ovens, cooktops or air conditioning systems are installed after handover by a licensed electrician, a compliance certificate for those connections should be provided at the time of installation

After solar or battery system installation - solar PV and battery storage systems have specific compliance certificate requirements in every state

How to verify an electrical compliance certificate

Receiving a compliance certificate is the first step, alongside broader building inspections. Verifying it is equally important.

Check the certificate details

  • The licensed electrician's licence number should appear on the certificate - verify the licence is current through the relevant state electrical safety regulator
  • The address on the certificate should match the property address
  • The date of issue should be recent - not a certificate carried over from a previous job
  • The description of work should cover all electrical work completed - not just a portion of the installation
  • The certificate should be signed by the licensed electrical contractor

Verify the electrician's licence

Each state electrical safety regulator maintains a searchable licence register:

  • Queensland: Electrical Safety Office at worksafe.qld.gov.au
  • NSW: ServiceNSW licence check at service.nsw.gov.au
  • Victoria: Energy Safe Victoria at esv.vic.gov.au
  • WA: EnergySafety at commerce.wa.gov.au
  • SA: Office of the Technical Regulator at otr.sa.gov.au

Confirm the licence is current, in the correct class for the work performed and has no conditions or disciplinary history.

Check for the network distributor inspection

In some states - particularly Queensland and Victoria - the network distributor conducts an inspection of the electrical installation before connection. Confirm whether an inspection has been completed and whether any defects identified during the inspection have been rectified.

What happens if you do not receive an electrical compliance certificate

Not receiving an electrical compliance certificate at or before handover is a serious deficiency - not a minor paperwork issue, and one of the common defects after handover homeowners encounter.

Legal implications

Request missing project records in writing from the contractor and builder. If they are not supplied, ask the relevant regulator about the next step. Insurance and sale requirements depend on the policy and transaction.

Insurance implications

Resale implications

What to do if you have not received the certificate

Request it in writing from the builder or directly from the licensed electrical contractor who performed the work. The electrician's licence number should be on any invoice or contract - use this to identify who to contact. If the certificate is not provided within a reasonable time, report the matter to the relevant state electrical safety regulator - particularly since it can affect your occupation certificate.

Electrical compliance and smart home systems

Smart home systems - automated lighting, climate control, audio-visual, security and home automation platforms - involve electrical work that requires compliance certification just as standard electrical installations do.

Key considerations

  • Fixed electrical wiring for smart-home equipment must be performed by an appropriately licensed electrician and certified where required. Plugging an approved plug-in power supply into an existing socket is different from altering fixed wiring.
  • Smart switches, smart panels and home automation hubs connected to the mains or data circuits require licensed electrical work where they interface with mains voltage
  • Solar and battery system connections for smart home energy management require specific compliance certification beyond the standard electrical certificate

Confirm with the builder and the smart home installer which elements of the smart home installation require licensed electrical work and that compliance certificates are obtained for all mains-voltage connections. See the companion guide Smart Homes Australia for the complete smart home installation framework.

Plumbing compliance certificates

Electrical compliance certificates are one of a set of compliance certificates that should be received at handover. Plumbing compliance certificates - confirming that plumbing and drainage work has been completed by a licensed plumber in accordance with relevant standards - are equally important and equally commonly overlooked. See which plumbing work requires certification for the full breakdown.

Plumbing documentation follows a separate approval process. See the plumbing compliance guide for the records relevant to the work.

Red flags

Electrical compliance certificate not provided at or before handover
Certificate does not include the licensed electrician's licence number - cannot be independently verified
Licence number on the certificate does not match the electrician's identity when verified through the state register
Certificate date is significantly earlier than practical completion - may not cover all electrical work completed
Description of work on the certificate does not cover all electrical work visible in the property
Builder cannot identify who the licensed electrician was or provide contact details for certificate follow-up
Network distributor inspection has not been completed where required before connection
Smart home mains-voltage connections are not covered by the compliance certificate
Solar or battery system installation does not have a separate compliance certificate
Builder suggests the compliance certificate will be provided after you have moved in - do not accept occupancy before the certificate is received

BUILTLY and lasting project records

Electrical compliance certificates are among the most practically important documents for any completed residential property - confirming that the electrical installation is safe, compliant and authorised. A future owner, renovator or insurer who can access the original electrical compliance certificate for a property has independently verifiable confirmation of electrical installation safety that self-reported project records cannot provide.

BUILTLY is building a record of completed Australian homes that credits the builder, architects, designers and trades behind each one.

BUILTLY is building a record of completed Australian homes that credits the builder, designers and trades behind each one.

Frequently Asked Questions

What is an electrical compliance certificate in Australia?

Electrical installation work is subject to jurisdiction-specific licensing, testing and documentation requirements. A certificate records the electrical contractor's declaration for the work described; it is not a guarantee against later faults.

When should I receive an electrical compliance certificate for a new home?

Ask the electrical contractor which records must be supplied to you and which notices must go to the regulator or network operator. Request the project electrical records for handover.

How do I verify an electrical compliance certificate?

Check that the certificate includes the licensed electrician's licence number, the correct property address, a recent date of issue and a description of work that covers all electrical work completed. Verify the electrician's licence through the relevant state electrical safety regulator - Electrical Safety Office in Queensland, ServiceNSW in NSW, Energy Safe Victoria in Victoria. Confirm the licence is current and in the correct class for the work performed. Check whether a network distributor inspection has been completed where required in your state.

What happens if I do not receive an electrical compliance certificate?

Request missing project records in writing from the contractor and builder. If they are not supplied, ask the relevant regulator about the next step. Insurance and sale requirements depend on the policy and transaction.

Does a smart home installation require an electrical compliance certificate?

Fixed electrical wiring for smart-home equipment must be performed by an appropriately licensed electrician and certified where required. Plugging an approved plug-in power supply into an existing socket is different from altering fixed wiring.