Verification

What happens if your builder goes bankrupt in Australia?

Last updated: October 2026 ·

Builder insolvency is one of the most stressful situations a homeowner or property developer can face during a construction project. When a builder collapses mid-project, it can leave partially completed homes, unpaid subcontractors, disputed contracts and significant financial uncertainty in its wake.

"Going bankrupt" is the phrase almost everyone uses, but in Australian law bankruptcy is a process that applies to individuals, including sole traders. Companies do not go bankrupt: they go into liquidation, administration or receivership. The distinction matters, because the two paths run under different legislation, involve different appointed officials, and end in genuinely different places.

This guide starts by helping you work out which of the two situations you are actually in, then focuses on the personal bankruptcy path, where the builder is an individual or sole trader. If your builder trades through a company, which is the more common arrangement in Australian residential construction, the companion guide on what happens if your builder goes into liquidation is the one you want.

Which situation are you actually in?

Most homeowners do not know their builder's business structure, because it rarely comes up in the sales process and the trading name on the signage often gives no clue. It takes about ten minutes to establish, and everything that follows depends on the answer.

Check the entity named on your contract and on the licence, not the trading name.

  • A company. The name ends in Pty Ltd and carries an ACN, or an ABN that belongs to a company. The insolvency process is liquidation, administration or receivership under the Corporations Act 2001, and the official appointed is a liquidator or administrator.
  • A sole trader. The licence and the contract are in a person's own name, sometimes with a registered business name attached. There is an ABN but no ACN. The insolvency process is bankruptcy under the Bankruptcy Act 1966, and the official appointed is a trustee in bankruptcy.
  • A partnership or trust. Less common in residential building, and the treatment depends on whether the partners are individuals or companies. Both processes can run at once. This is the case where legal advice matters most.

Two free searches settle it. An ABN Lookup search at abr.business.gov.au shows the entity type against the ABN, and states plainly whether it is an individual or a company. The state licence register shows which entity holds the building licence, which is the entity that matters for your statutory warranty cover. The BUILTLY guide on how to check a builder's licence in Australia sets out the register to use in each state, and how to check a builder's ABN and company history covers reading the entity record itself.

If your builder is a company, read the liquidation guide instead. Most residential builders in Australia trade through companies, so liquidation is the far more common scenario, and it is covered end to end in what happens if your builder goes into liquidation in Australia, including the liquidator relationship, creditor priority and the claim sequence. The rest of this guide deals with the individual and sole trader case.

Why do builders go bankrupt in Australia?

Construction businesses operate on tight margins and are exposed to a range of financial pressures that can lead to insolvency. Common factors contributing to builder collapse include:

  • Fixed price contracts - builders locked into fixed price contracts during periods of rising material and labour costs can find projects become financially unviable
  • Cash flow problems - construction businesses rely on consistent cash flow between progress payments, and gaps can quickly create financial pressure
  • Rapid growth - builders who take on more projects than their business can manage financially are vulnerable to collapse
  • Supply chain disruptions - delays in materials can extend project timelines and increase costs beyond what was budgeted
  • Rising interest rates - increased borrowing costs affect both builders and the clients commissioning new work, reducing demand and squeezing margins

Understanding why builders collapse helps homeowners and developers identify warning signs early and take protective action before a formal insolvency event occurs.

Warning signs that a builder may be in financial difficulty

Before a formal insolvency event occurs, there are often warning signs that a builder is experiencing financial difficulty. These can include:

  • Unexplained delays in construction progress
  • Subcontractors stopping work or indicating they have not been paid
  • Builder requesting early or unscheduled progress payments
  • Difficulty contacting the builder or receiving responses to queries
  • Suppliers delivering less material than expected or ceasing deliveries
  • Builder requesting variations to the contract scope without clear justification
  • Unpaid invoices from trades and suppliers being directed to the homeowner

If you notice any of these signs, seek legal advice promptly. Acting early provides significantly more options than waiting until formal insolvency is declared.

Two patterns are particularly worth flagging. The first is a builder requesting payment ahead of the corresponding stage of completion, framed as a cash-flow accommodation, a supplier early-payment discount, or a way to "lock in" material costs. Any payment made ahead of the contract stage is exposed if the builder collapses, because the statutory scheme will only contribute to the value of work actually completed. The second is a sudden shift in subcontractor identity on site: long-standing trades being replaced at short notice, or work being completed by trades who appear unfamiliar with the project, often indicates the previous trades have not been paid and have walked off.

Cross-referencing publicly available signals also helps. The ASIC company register will show insolvency notices filed against the building company. The relevant state licensing register (QBCC, NSW Fair Trading, Building and Plumbing Commission (BPC), Building and Energy WA, CBS SA, CBOS Tasmania, Access Canberra) will show licence suspensions, conditions, or recent complaints. In Queensland the register goes further and publishes the licensee's financial category, so a QBCC licence check gives you a capacity signal as well as a status check. None of these signals on their own is conclusive, but two or more in combination should be treated as a strong warning.

For further guidance on evaluating builder reliability, refer to the BUILTLY guide on red flags to watch for when choosing a builder.

What happens when a builder is declared insolvent?

Whichever path applies, an external official takes control of the builder's affairs and the builder stops making decisions about your project. For a sole trader that official is a trustee in bankruptcy; for a company it is a liquidator or administrator. At this point:

  • All work on your project will likely stop immediately
  • The builder's employees, subcontractors and suppliers become creditors, of the bankrupt estate or of the company
  • Your building contract may be disclaimed by the trustee or administrator, or terminated by you on legal advice
  • Access to the building site may be restricted while the appointed official assesses the position
  • You become a creditor yourself, and your claim on the statutory insurance scheme is usually worth far more than your claim in the insolvency

Your immediate priority is to understand your legal position under your building contract and to activate any insurance protections available to you.

Bankruptcy and liquidation: the procedural difference

The two processes look similar from the outside and diverge in ways that change what you can recover and for how long. The table below sets out the differences that actually affect a homeowner.

FeatureSole trader: bankruptcyCompany: liquidation
LegislationBankruptcy Act 1966 (Cth)Corporations Act 2001 (Cth)
Regulator and public recordAFSA, recorded permanently on the National Personal Insolvency IndexASIC, recorded against the company and its directors
Who is appointedTrustee in bankruptcy, who administers the person's estateLiquidator or administrator, who controls the company
How you claim in the insolvencyProof of debt to the trustee as an unsecured creditor of the estateProof of debt to the liquidator, ranked in the statutory priority order
What can be realisedThe person's divisible property, with protected assets excluded, plus income contributions above a thresholdCompany assets only. Directors are generally not personally liable absent a guarantee or insolvent trading finding
How it endsDischarge, normally three years and one day after the statement of affairs is accepted. The person continues to existDeregistration. The company ceases to exist and cannot be pursued at all
Can they build againLicence eligibility is normally lost while undischarged, and can be regained after discharge subject to the regulatorDirectors may register a new company, which is the phoenix pattern to watch for

Three consequences follow for a homeowner dealing with a bankrupt sole trader. First, the person survives the process, so unlike a deregistered company there is a party still in existence, and whether they can be pursued depends on whether your loss was a provable debt released on discharge. Take advice on that question specifically rather than assuming either outcome. Second, the trustee is administering a personal estate that includes assets and debts having nothing to do with your build, so your claim competes with credit cards, tax debts and other trade creditors, and returns to unsecured creditors are typically low. Third, a bankrupt is subject to restrictions during the bankruptcy, including limits on managing a company and on holding a building licence in most states, which means a sole trader builder in bankruptcy generally cannot lawfully return to finish your work even if they offer to.

The licence point is worth verifying rather than assuming. Residential building licences across the states carry fitness and financial requirements, and undischarged bankruptcy is commonly a disqualifying or reviewable event. If your builder is bankrupt and still working, check the licence register and see the BUILTLY guide on what to do if your builder is suspended or disqualified.

Whichever official is appointed, you are dealing with an external party rather than your builder from the moment of appointment. Put everything in writing, and have a construction lawyer check any instruction or payment direction before you act on it. For the company path in full, including the liquidator relationship and creditor priority, see builder liquidation in Australia.

Your contract and in-progress work when the builder is an individual

When your counterparty is a person rather than a company, the contract does not simply evaporate with the entity. That changes several practical questions on a part-built site.

The contract survives the appointment, but the trustee controls it. Bankruptcy does not automatically terminate your building contract. The trustee decides whether to disclaim it, and until that decision is made the contract technically remains on foot even though no work is happening. Most contracts also give you a right to terminate on an insolvency event. Do not terminate without advice: terminating at the wrong moment, or on the wrong ground, can affect both your insurance claim and your position as a creditor. Confirm the correct sequence with a construction lawyer and with your scheme insurer, since some schemes expect termination to happen in a particular order. The BUILTLY guide on termination of a building contract in Australia sets out the mechanics.

The licence, not the person, carries your statutory cover. Your warranty insurance certificate names the licensed builder. Where that licensee is an individual, the cover attaches to work performed under that licence for your contract, and the insolvency trigger is met by the bankruptcy itself. Locate the certificate and the premium receipt before anything else, because a certificate that was never issued is the single worst outcome in either scenario.

Materials and unfixed goods on site. Anything fixed to the land is generally part of your property. Unfixed goods delivered but not paid for are more complicated, because the trustee is gathering the bankrupt's divisible property and a supplier may claim retention of title. Where your contract says materials become yours once the progress payment covering them has been made, your payment records are what prove it. Do not remove, use or dispose of unfixed materials before getting advice and recording what is present.

Retention, warranties and the defects period. Any retention you hold is a fund the trustee may claim, so treat it as disputed rather than yours to spend. Statutory warranties on the completed work remain owed by a person who still exists after discharge, which is nominally better than a deregistered company, but a discharged bankrupt with no assets is not a practical source of rectification money. Treat the statutory scheme as your real defects remedy. The BUILTLY guide on builder warranties in Australia explains what those entitlements cover.

Personal guarantees run the other way too. Sole traders sometimes ask homeowners to sign side agreements, and homeowners sometimes hold personal guarantees from a company director. With a sole trader there is no separate company, so the person is already personally liable for the contract, and no guarantee adds anything. That is the one structural advantage of the sole trader case: liability was never limited by a corporate shell in the first place. It is only useful to the extent the person has assets.

Home warranty insurance: your primary protection

In Australia, residential building work above a certain value is required to be covered by home warranty insurance - also known as domestic building insurance in some states. This insurance is specifically designed to protect homeowners in the event that a builder becomes insolvent, dies or disappears.

Home warranty insurance typically covers:

  • The cost of completing unfinished work by a new builder
  • The cost of rectifying defective work that the original builder cannot fix
  • Financial losses up to the policy limit

Before your project begins, confirm that your builder has obtained the required home warranty insurance for your project and request a copy of the certificate of insurance. For more detail on builder protections, refer to the BUILTLY guide on builder warranties in Australia.

Coverage limits and schemes by state

Coverage limits and scheme details vary by state:

New South Wales

The Home Building Compensation Fund (HBCF) is administered by the State Insurance Regulatory Authority (SIRA) and underwritten by icare. Cover is required for residential building work above the scheme threshold set by SIRA and responds where the builder dies, disappears, becomes insolvent, or has their licence suspended in defined circumstances. Verify current threshold, cover limits and notification timeframes at sira.nsw.gov.au.

Victoria

From 1 July 2026, Home Warranty administered by the Building and Plumbing Commission (BPC) applies to eligible new domestic building contracts signed on or after that date for work valued at more than $20,000. Existing Domestic Building Insurance (DBI) policies for earlier contracts continue under their original terms and do not transfer to Home Warranty. Home Warranty may assist where a builder is unable or unwilling to complete or fix eligible incomplete, defective or non-compliant work, subject to eligibility, limits and exclusions. Legacy DBI remains subject to its own claim triggers; the change of administrator does not change those policy terms.

Queensland

The Queensland Home Warranty Scheme is administered directly by the Queensland Building and Construction Commission (QBCC). Cover is required for most residential building work above the QBCC threshold and is paid as a premium by the builder before work starts. The scheme covers non-completion, defective work and subsidence within defined limits. Verify current threshold, cover limits and defect categories at qbcc.qld.gov.au.

Western Australia

Home Indemnity Insurance (HII) is regulated by Building and Energy within the Department of Energy, Mines, Industry Regulation and Safety (DMIRS) and provided through approved private insurers. Cover is required for residential building work above the prescribed threshold and responds to non-completion and defect cover in the death, disappearance and insolvency scenarios. Verify current thresholds, sum insured limits and approved insurers at dmirs.wa.gov.au.

South Australia

Building Indemnity Insurance is overseen by Consumer and Business Services (CBS) and provided through approved insurers. Cover is required for domestic building work above the threshold set under the Building Work Contractors Act and responds to non-completion and to defects discovered within the statutory warranty period where the builder is unable to rectify. Verify current thresholds, eligible insurers and claim processes at cbs.sa.gov.au.

Tasmania

Residential building consumer protection is administered by Consumer, Building and Occupational Services (CBOS). Tasmania has historically not operated a mandatory home warranty insurance scheme in the same form as the eastern states, with protections relying more heavily on the statutory warranty regime and builder licensing. Verify the current arrangements and any scheme changes at cbos.tas.gov.au.

Northern Territory

Building work and home certification arrangements sit under the Building Practitioners Board and the relevant Northern Territory government department. Residential warranty insurance arrangements have been reviewed periodically. Verify the current scheme name, scope and any mandatory cover at nt.gov.au before signing a residential building contract.

Australian Capital Territory

Residential building work is regulated through Access Canberra under the Building Act. Statutory warranty protections apply to most residential building work and warranty insurance requirements have changed over time. Verify current eligibility thresholds, approved insurers and claim pathways at accesscanberra.act.gov.au.

How state statutory schemes respond to builder insolvency

Although the scheme names and administrators differ, the underlying response pattern is broadly similar across the eastern states. The recognised trigger events are typically death, disappearance, and insolvency. Importantly, the schemes do not treat individual and company builders differently: insolvency is the trigger however it arises, so bankruptcy of a sole trader licensee and liquidation of a licensed company both satisfy it. What differs is only the evidence you produce, an AFSA record for a bankrupt person or an ASIC record for a company. The state table above and this section therefore apply equally whichever structure your builder used. Licence cancellation in defined circumstances can also be a trigger in some states.

Once a trigger event is confirmed, the scheme generally responds in two ways. Non-completion cover contributes to the cost of completing the work to the original contract scope, subject to the scheme's cover cap and exclusions. Defects cover contributes to the cost of rectifying defective work within the statutory warranty period where the builder cannot do so. Cover is not unlimited and is usually capped per dwelling. Where the rectification cost or completion cost exceeds the cap, the homeowner is left to recover the balance against the insolvent builder personally, which is rarely productive in practice.

The mechanics of lodging a claim also vary. In Queensland the homeowner deals directly with the QBCC for both licensing and warranty matters. In NSW and Victoria the claim is lodged with the relevant scheme administrator (SIRA / icare in NSW; the BPC for eligible Victorian Home Warranty contracts from 1 July 2026, or the provider named on the legacy DBI policy for earlier contracts). In WA and SA, the homeowner lodges the claim with the approved private insurer that issued the certificate of insurance for the project, with the relevant state agency (Building and Energy in WA, CBS in SA) acting as regulator rather than insurer.

Notification deadlines are easy to miss in the chaos of a builder collapse and are one of the most common reasons claims are denied or delayed. As a general rule, lodge the claim as soon as the insolvency event is publicly confirmed (typically by ASIC notice for a company, by AFSA notice for a bankrupt sole trader, or by formal communication from the appointed administrator or trustee). For state-specific scheme detail, see the BUILTLY guide on builder warranties in Australia which sets out the state-by-state statutory warranty schemes in detail.

Tasmania, the Northern Territory and the ACT have historically operated different consumer protection arrangements, with less reliance on a mandatory home warranty insurance scheme and more reliance on the statutory warranty regime under residential building legislation. In those jurisdictions the regulator is the primary first point of contact rather than an insurance scheme administrator.

What to do first

The immediate sequence is the same in either insolvency: confirm the event on the public record, get construction law advice before terminating anything, write to the appointed trustee or liquidator, secure and photograph the site, lodge the statutory scheme claim inside its notification window, commission an independent assessment of the work in place, and only then approach a replacement builder. That sequence is set out step by step, with the documentation pack the scheme will ask for, in what happens if your builder goes into liquidation in Australia. It applies unchanged to a bankrupt sole trader, substituting the trustee for the liquidator and the AFSA record for the ASIC notice.

Three points are specific to the individual case and worth acting on straight away. Search the National Personal Insolvency Index rather than ASIC to confirm the bankruptcy and obtain the record your insurer will want. Check the state licence register at the same time, because an undischarged bankrupt generally cannot hold a builder licence, and if the licence is already cancelled or suspended your scheme claim may have a second available trigger. Do not accept an offer from the builder to keep working informally or through a friend's licence, which is a common approach in sole trader collapses and will jeopardise both your cover and your compliance position.

BUILTLY is building a record of completed Australian homes that credits the builder, designers and trades behind each one.

Recovering deposit and progress payments

Most homeowners affected by a builder collapse are out of pocket on a combination of deposit, progress payments already made, and the extra cost of completing the work with a replacement builder. The recovery path depends on which category of loss it is.

Deposits paid before work started. Most statutory schemes provide some level of cover for lost deposits where the builder becomes insolvent before substantial work has commenced. Cover is typically capped well below the statutory maximum deposit allowed under state legislation. The scheme will require evidence of payment, evidence that work had not progressed in proportion to the deposit, and evidence of the insolvency event.

Progress payments already made. Where progress payments have been made but the work paid for has not been completed to the corresponding stage, the gap is recoverable in principle through the non-completion cover under the statutory scheme. This is why it is critical that progress payments are tied to verified completion of the contract stage rather than paid in advance. Any progress payment made ahead of the corresponding stage of completion is at significant risk of not being recoverable.

The cost-to-complete gap. The most significant financial loss in most builder collapses is not the money already paid, but the additional cost of finishing the work with a new builder. Replacement builders almost always quote higher than the original contract price because they are taking on partially completed work of unknown quality, often with damaged or stolen materials and incomplete documentation. The statutory scheme contributes to this gap up to the scheme cap.

Claiming in the bankruptcy itself. Lodging a proof of debt with the trustee is a last resort in either scenario, but the arithmetic is different for an individual. The estate is the person's divisible property, so the pool is whatever assets are not protected, plus income contributions where their earnings exceed the statutory threshold during the bankruptcy. Household goods to a set limit, superannuation in most cases, and a vehicle up to a limit are excluded from that pool. Your claim ranks as unsecured alongside the person's tax debts, credit cards and trade creditors, so returns are typically low. Lodge the proof of debt anyway, because it costs little, and because it is the step that makes your loss a proved debt rather than an informal complaint.

Completing the build with a new builder

Engaging a replacement builder to finish a partially completed home is a different exercise from engaging a builder for a new project. The scope is harder to define, the risk profile is different, and most established builders are reluctant to take on incomplete work without thorough due diligence on what has already been built.

The starting point is an independent building assessment of the work in place: what has been built, to what standard, and what defects or compliance issues need to be addressed before further work can proceed. Many statutory schemes will fund this assessment as part of the claim process; even where they do not, it is worth commissioning at the homeowner's expense because it underpins both the insurance claim and the replacement builder's scope.

When approaching potential replacement builders, provide the full documentation pack from the previous section, the independent assessment report, and a clear summary of the insurance claim status. Builders who have completed work in similar typologies and who have a transparent record of past projects are the strongest candidates. The BUILTLY guide on how to evaluate a builder's past projects sets out the canonical evaluation framework.

The new contract should clearly delineate the scope of the replacement builder's work from the original builder's scope, define the basis on which the existing work has been accepted, and address how any defects in the original work will be treated. Statutory warranty cover under the new contract typically applies only to the replacement builder's scope, not to the original builder's work. Legal advice on the replacement contract is strongly recommended.

What about unpaid subcontractors and suppliers?

When a builder collapses, subcontractors and suppliers who have not been paid become creditors of the insolvent builder. Where the builder is a sole trader they are creditors of that person's bankrupt estate, which changes the dynamic on site: the trades know there is a real person with real assets somewhere, and direct pressure on the homeowner is more common than it is in a company collapse. Some will attempt to recover payment directly from you, and some will threaten a caveat over the property.

Your position does not change with the builder's structure. You contracted with the builder, not with the trades, so you are generally not liable for the builder's debts to them provided your progress payments were made correctly under the contract. Refer any direct approach to your lawyer, do not make side payments to trades to keep them on site without advice, and be aware that paying a subcontractor directly can complicate both your scheme claim and your position with the trustee. Where a supplier claims retention of title over unfixed materials, that is a claim against the estate and the goods, not a debt of yours.

Security of payment legislation in each state gives subcontractors mechanisms to recover unpaid amounts, and in most circumstances those claims run against the insolvent builder rather than the homeowner. For more, see the BUILTLY guide on builder complaints and disputes in Australia.

Protecting yourself before construction begins

The best protection against builder insolvency is thorough due diligence before signing a contract. Key steps include:

  • Verify the builder holds a current licence with the relevant state authority - see how to check a builder's licence in Australia
  • Confirm home warranty insurance is in place before work begins
  • Review the builder's financial track record and trading history
  • Avoid paying more than the contractually required progress payment at each stage
  • Never pay a deposit that exceeds what is permitted under your state's building legislation
  • Ensure your contract includes clear provisions for termination and dispute resolution

One extra check is specific to this guide: establish the entity you are contracting with before you sign, not after something goes wrong. A licence held by an individual is not a warning sign in itself, and plenty of experienced sole traders build excellent homes, but it tells you which insolvency path would apply and that there is no corporate shell in either direction. The full pre-contract sequence is set out in how to research a builder before signing a contract, and the wider build process from finance through to handover is covered in the BUILTLY complete guide to building a house in Australia.

BUILTLY is building a record of completed Australian homes that credits the builder, designers and trades behind each one.

Frequently asked questions

How do I know whether my builder is a sole trader or a company?

Look at the entity named on your building contract and on the licence. A name ending in Pty Ltd with an ACN is a company, and the relevant process is liquidation rather than bankruptcy. A licence held in a person's own name, with an ABN but no ACN, indicates a sole trader, and the relevant process is personal bankruptcy under the Bankruptcy Act 1966. An ABN Lookup search and the state licence register will both show which entity holds the licence.

Will home warranty insurance cover the full cost of completing my home?

Home warranty insurance has coverage limits that vary by state. The insurance may not cover the full cost of completion if the remaining work is extensive or if building costs have increased significantly since the original contract was signed. An independent building assessment will help establish the gap between the insurance payout and the actual cost to complete.

What if my builder goes bankrupt before work has started?

If a builder becomes insolvent before work begins, home warranty insurance may cover your deposit up to the policy limit. Confirm the specific terms of the insurance policy and lodge a claim promptly. Legal advice should be sought to understand your rights under the contract.

Can I keep the materials on site if my builder goes bankrupt?

Ownership of materials on site depends on your contract and whether the materials have been paid for. Some contracts specify that materials on site become the property of the homeowner once a progress payment covering those materials has been made. Seek legal advice before removing or using any materials on site.

How long do I have to make a home warranty insurance claim?

Time limits for making a claim vary by state and the nature of the claim. In most cases, claims must be lodged within a defined period after becoming aware of the insolvency event. Act promptly and contact your state's home warranty insurance scheme as soon as insolvency is confirmed.

What if my builder is a sole trader who has declared personal bankruptcy?

A trustee in bankruptcy is appointed to administer that person's estate under the Bankruptcy Act 1966, and you become a creditor of the estate rather than of a company. The practical first steps are the same as any insolvency, but two things differ: the person continues to exist after the bankruptcy ends, and the bankruptcy itself normally affects their eligibility to hold a builder licence. This guide covers that scenario in detail.

Does a discharged bankrupt builder still owe me money?

Most debts provable in the bankruptcy are released on discharge, which normally occurs three years and one day after the statement of affairs is accepted. In practice a debt you proved in the estate is not recoverable from the person afterwards, even though the person still exists. That differs from company liquidation, where the company is deregistered and no entity survives at all. Take legal advice on which of your losses are provable debts before relying on either outcome.